It is usable for injection molding and curing operations of rubber
products with high density, high accuracy, complicated shape, thick
wall and inlays. Rubber injection molding machine in china
1. The control system provides three stages (multiple stages) of
injection rates and pressures and two stages of pressure holding to
meet different requirements of stock for the injection condition.
The electronic position scale is provided to give precise control,
improving the injection accuracy.
2. The mold closing and takeout system has the three-stage mold
separating and takeout unit. The upper segment of the mold can be
opened fully up to the angle of 70° so that the mid segment can be
separated easily, which makes the operation convenient.
3. The self-contained oil heating system with the PID thermostat is
used to control the temperature at the stock storage stage and the
injection stage. The heated spots on the work table are distributed
rationally and controlled with the PID thermostat.
4. The specialized computer control system is provided for the
electrical control system. All operations can be displayed on the
touch screen and all parameter setting is convenient and visual.
The operations in the whole process are monitored with the
functions of malfunctional self-diagnosis and alarm. It has the
space for 100 sets of mold operation parameters and the preparation
period before production is short.
5. The low-noise hydraulic circuit is used for the hydraulic system
so that the machine makes less noise during operation.
6. The two-hand operated infrared safety protector is used to
ensure the safety of the operator. It has the protection function
of locking the mold at low pressure to protect the mold from